Pre-War Gibson L-5 Owners' Club

 

 

 

contact us at info@prewargibsonl-5.com

Luthier Michael Heiden restores L-5 Serial Number 90901

Before restoration:

 

When this guitar was acquired, two holes had been cut into the top to fit pickups with additional holes - on both the right and left of the bridge - for tone and volume controls. At a later stage the pickup holes had been filled with spruce patches and the remaining holes lugged.

 

A heavy coat of varnish had been applied to the body and neck as well as the fingerboard. Though the guitar still had its original trapeze tailpiece, later Kluson tuners had been installed, the pickguard was missing and there were no thumbwheels on the bridge.

 

 

 

After restoration

 

Restoration was carried out by luthier Michael Heiden (heideninstruments.ca). This included fitting a new 19-fret ebony fingerboard with a square end and dot inlays from the third fret and rebinding the neck (the guitar originally had a block inlaid fingerboard).

 

New patches were fitted to the holes in the top - fortunately the braces were undamaged – and the guitar was refinished with a black top, to conceal the repair work and sunburst back, sides and neck. New Grover 18:1 Sta-Tite Gold tuners and a new bridge completed the work.

 

“As a memento of its previous life, the guitar retained the 1940s strap hooks that were on before the restoration,” says its owner Richard Poitras.

90901 head front 90901 PICKUP PATCH 2 90901 BLACK FULL FRONT 90901 new back in chair 90901  end pin 90901  new head 2
90901 In case